• Facebook
  • Yahoo
  • Twitter
  • Google
  • Live
  • Facebook
  • Yahoo
  • Twitter
  • Google
  • Live

SERS-based sensor "traps" heavy metals in water at ultralow concentrations

2 Aug | By Biophotonics.World
SERS-based sensor
A surface plasmon-polariton based functionalized SERS platform for the detection of heavy metal ions
Image source: From Sensors and Actuators B: Chemical
Scientists from Tomsk Polytechnic University and the University of Chemistry and Technology (Prague, Czech Republic) have created novel chemical sensors for use in Raman spectroscopy. TPU scientists have equipped the sensors with organic chemical compounds and applied them for determining dyes prohibited in Europe and heavy metals in water at ultralow concentrations. The latest outcomes of the study have been published in the journals Sensors and Actuators B: Chemical and Chemistry of Nano Materials.


The sensor is a multi-layer material based on a thin gold film with the size of 1x0.5 cm. The surface of the material is a wave-like structure. Using special reagents, TPU scientists graft organic compounds on the surface of the substrate by a covalent surface modification via diazonium chemistry.

"In the study we demonstrate possibility of creating such chemical sensors. The novelty is that we combined both chemical and physical methods. Our colleagues in Prague prepare substrates by physical methods and we apply organic compounds using chemical methods.

Due to this combination we eventually got the opportunity to detect heavy metals at ultralow concentrations. We can monitor trace concentrations of substances. Thus, the sensitivity of sensors for dyes reaches 10-16 M and for heavy metal ions it is about 10-14 M," says Pavel Postnikov, the Associate Professor of the Department of Technology of Organic Substances and Polymer Materials.

"The process of analysis is very simple: we put the sensor into the water and molecules of toxic substances are immobilized on the surface of the substrate. The analysis of dyes is more difficult," notes Pavel Postnikov.

"We use an interesting polymer which is water-soluble at room temperature and when heated it turns into insoluble form.Polymer chains capture dye molecules and, when heated, press them to the surface. Then, we take out the substrate and place it in the spectrometer. We get the result in two minutes.

"In the long term, these sensors may be used to monitor liquids in food technology, medicine and environmental studies."It takes several minutes to carry out this analysis. Therefore, it can be used on site, for example, one may take samples from the reservoirs and receive an immediate result that would show if there are any toxic substances present in the water even at ultralow concentrations," adds the researcher.

Press release of Tomsk Polytechnic University.

Share on Biophotonics.World:
Share on Social Media:

Comments:

No comments
You need to sign in to comment

Categories

Most Viewed

Most Discussed